Results 1 to 25 of 34

Thread: Sure is quiet around here, what's everyone shooting these days?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member Slowpoke Slim's Avatar
    Join Date
    Jun 2009
    Posts
    557
    Quote Originally Posted by D. Sanders View Post
    Finally getting a chance to play with my new 22 K-Hornet barrel from SSK. Discovered that 3 grains of Titegroup under a 70 grain Speer Semi-Spitzer, in a WW-Super case with a Win. small pistol primer is the point that it goes supersonic. I backed it down to 2.8 grains and its about the same tone as a CCI quiet but hits my little 2" steel plate with much more authority at 100 yards. I'm gonna chronograph it and play with the seating depth this week to see what kind of groups I can get. I may pick up some the Hunters Supply 58 grain slick coat bullets to see how they shoot. I'll also be be working up supersonic loads with Speer 33 grain HP's & Hornady 40 grain V-Max's.
    My go to load for my Hornet has been 40 gr Vmax, Lil-gun powder, and a Rem 6 1/2 primer. I'm not playing with sub sonic loads though.
    12F, McGowen 6.5x284 1-8&quot; twist, Nightforce 12-42x BR<br />BVSS, McGowen barrel, 22-250 1-9&quot; twist, Nikon 6-18x<br />16 FHLSS Weather Warrior, Sinarms 257 Roberts, Pentax 3-9<br />Stevens 200, 223 bone-factory-stock, Nikon 3-9x<br />Scratch-built BVSS, LW 243 1-8&quot; twist, Viper 6.5-20x50 mil-dot

  2. #2
    Basic Member
    Join Date
    Dec 2022
    Location
    Central Louisiana (Pollock)
    Posts
    48
    Quote Originally Posted by Slowpoke Slim View Post
    My go to load for my Hornet has been 40 gr Vmax, Lil-gun powder, and a Rem 6 1/2 primer. I'm not playing with sub sonic loads though.
    Those are the exact components I'll be using if I ever find one of those round tuits.

  3. #3
    Basic Member BobT's Avatar
    Join Date
    Dec 2006
    Location
    Missouri Ozarks
    Age
    65
    Posts
    707
    Took a couple of AR's to the range yesterday afternoon along with a few guys from work. I took a new to me .350 Legend along and shot a few rounds through it. I didn't shoot the .350 a lot but it seems like it wants to shoot so I may play around with it some this summer.
    It's better to shoot for the moon and hit the fencepost than to shoot for the fencepost and hit the ground!

  4. #4
    Team Savage Mjshell's Avatar
    Join Date
    Nov 2022
    Location
    Lake of the Ozarks, Missouri
    Posts
    133
    Well put off chores today and headed to the bench. Shot my 257AI ladder and narrowed down a starting powder charge weight. Then picked two loads and loaded 3 rounds of each. Faster load (2800 fps) was disappointing at 3” group. The second group loaded at 2700 fps produced a .6 group( 2 ragged hole with one out) will work on tweaking the load. Head space was a tad long.

    Then shot my 226jdj and 280AI. They were shooting 18” high. Last time I shot them was at the Big Piney shoot last year. They were sighted in at 600 yards.

    Then broke out a couple of revolvers. Ruger 38 special and a S&W Governor. Had never pulled the trigger on the Governor, Shot 45 acp, 45 Colt, and 410 buckshot. The Governor shot all three close to point of aim at 7 yards.

  5. #5
    Basic Member Slowpoke Slim's Avatar
    Join Date
    Jun 2009
    Posts
    557
    Took the 2x fixed Leupold off of my 256 barrel and mounted a Burris 4-14x rifle scope instead. Not worried about eye relief, as the pistol barely moves during recoil. I did have to top out the height adjustment in the "up" direction to get it roughly bore sighted where there Leupold was. ( I compared both with my laser bore sighter to hopefully be on paper with the new scope).

    Anyway, it does kind of look ridiculous to have such a monster scope on it, but at least I should be able to shoot for group size now. I may leave it on after load development, or I may hunt down a "proper" handgun scope for it.


    Forgot to put up a picture:

    Click image for larger version. 

Name:	256 win mag Burris riflescope.jpg 
Views:	4 
Size:	137.2 KB 
ID:	9531
    12F, McGowen 6.5x284 1-8&quot; twist, Nightforce 12-42x BR<br />BVSS, McGowen barrel, 22-250 1-9&quot; twist, Nikon 6-18x<br />16 FHLSS Weather Warrior, Sinarms 257 Roberts, Pentax 3-9<br />Stevens 200, 223 bone-factory-stock, Nikon 3-9x<br />Scratch-built BVSS, LW 243 1-8&quot; twist, Viper 6.5-20x50 mil-dot

Similar Threads

  1. MSR10 Pretty quiet on the MSR front...
    By J.Baker in forum Other Savage Centerfire Models
    Replies: 16
    Last Post: 11-23-2017, 09:37 PM
  2. Quiet muzzle device for 10 FCP-SR?
    By tcoz in forum Other Firearm and Shooting Accessories
    Replies: 9
    Last Post: 12-24-2016, 01:18 PM
  3. CCI Quiet-22 Has anyone tried them yet?
    By thomae in forum Ammunition & Reloading
    Replies: 18
    Last Post: 09-18-2013, 11:09 PM
  4. Quiet ammo showdown 2 - Rem CBEE22 vs CCI Quiet
    By TOP PREDATOR in forum Ammunition & Reloading
    Replies: 2
    Last Post: 09-01-2012, 05:17 AM
  5. It's Been A Quiet Summer
    By Dogbone in forum Predator and Varmint Hunting
    Replies: 1
    Last Post: 09-25-2010, 03:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •