Quote Originally Posted by TommyD11730 View Post
One step forward, 2 steps back.

However....
The rifle is intermittently fireing on its own with the bolt rotating to close. Not every time, in and out of the stock. It has a Timney trigger. After adjusting the sear 6 ways to Sunday, without success I put the accutrigger back in
Set it at 2.5 lbs and I can't get it to fire on its own anymore. The sear on the Timney has to me a worn spot. Hard to tell if it's factory but I doubt it.
I guess you figured out that the trigger needs to be preloaded against the sear for it to not trip on bolt close. Inspect the trigger sear surface. It should be sharp not rounded. The sear needs to be inspected also.

And you are right. If you do not have metal pillars or an aluminum chassis then 60 Inch/lbs is waaaay to tight. However if it does have pillars or is in a chassis then those numbers are close if you have the correct thread engagement.


So, pillar your stock.