Quote Originally Posted by hamiltonkiler View Post
First find twist rate.
If it’s a 1-9 barrel find some federal match 69-77gn serria match kings.
If it’s a 1-12 twist go to a light varmint bullet.


As you said make sure your using quality mounts and a scope that you have proved to hold.

Make sure action to stock is tight. I always bed the front of the action and recoil lug. It’s a 20min job.

Clean non damaged crown.

Scrub barrel clean.

Trigger breaks smooth and isn’t heavy

If it wont shoot a 1” after all this has been tested you might need to re barrel the gun.
Or see what a professional smith says.


Sent from my iPhone using Tapatalk
Great suggestions. Thanks.

Any advice on how to bed the front action and recoil lug?
trigger is actually very good (accutrigger) light and crisp