Carbon Fiber Axis Stock

[Runkelbl]

Rifle gets picked up tomorrow. Hoping to bore sight it/then get a few baseline 5 shot group with a few different bullets before I start building. Should have gun apart and stock started this weekend. I can't seem to upload photos of the carbon fiber body panels that I finished, but they turned out great!
Build plans(open to suggestions):
:
-Carbon fiber stock/bedded
-Trigger job or drop in
- Carbon fiber or forged and milled trigger guard
-Bolt sleeve, bolt face, bushing, firing pin, hand forged bolt handle
-Proof Research carbon fiber barrel

I'm sure I'm missing some other things too.
Planning on documenting everything, maybe even posting the progress to YouTube. Will keep everyone updated.

[prdatr]

Rifle gets picked up tomorrow. Hoping to bore sight it/then get a few baseline 5 shot group with a few different bullets before I start building. Should have gun apart and stock started this weekend. I can't seem to upload photos of the carbon fiber body panels that I finished, but they turned out great!
Build plans(open to suggestions):
:
-Carbon fiber stock/bedded
-Trigger job or drop in
- Carbon fiber or forged and milled trigger guard
-Bolt sleeve, bolt face, bushing, firing pin, hand forged bolt handle
-Proof Research carbon fiber barrel

I'm sure I'm missing some other things too.
Planning on documenting everything, maybe even posting the progress to YouTube. Will keep everyone updated.

I would love to see some pictures. Anywho, I would skip the trigger job and go straight to a Rifle Basix trigger. As far as the bolt I would sent it off to Chad at LRI and have him flute it. The price is great and turn around time is very quick.

[Runkelbl]

I agree, a Rifle Basix trigger is probably the best bet, but I'm also holding out hope that Triggertech will eventually release a line of triggers for Savage rifles. As far as the bolt, I will be jeweling it myself. I kicked around the idea of fluting it, but if switch directions and go that route, I'll probably try fluting it myself. I have the luxury of a full machine shop at my disposal, as I am CNC programmer.

Anyways, pictures coming.......As soon as I can figure out how to upload pictures here from my phone