Results 1 to 25 of 29

Thread: Federal 308 Gold Medal No Longer Match?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member
    Join Date
    Jan 2015
    Location
    Austin
    Posts
    1,710
    Thanks, RH, I'm going to try that. My 44 grain load of Varget produced 2800 fps (900 ft ASL) SD 4, ES 9 but a .7 moa group, again this was with the ELDM. I've tried 42.1 of IMR 4895 and found it extremely accurate but that powder is not as temp stable as Varget.

    What was the velocity of your 41.2 grain load?
    Banning a gun will not solve what is a mental health crisis inflamed by incendiary rhetoric on social and television media. The first amendment in this case is less precious and more likely the causal factor than the second amendment.

  2. #2
    Basic Member eddiesindian's Avatar
    Join Date
    Feb 2013
    Age
    64
    Posts
    1,412
    Quote Originally Posted by Texas10 View Post
    Thanks, RH, I'm going to try that. My 44 grain load of Varget produced 2800 fps (900 ft ASL) SD 4, ES 9 but a .7 moa group, again this was with the ELDM. I've tried 42.1 of IMR 4895 and found it extremely accurate but that powder is not as temp stable as Varget.

    What was the velocity of your 41.2 grain load?
    My guess.......maybe 2600ish
    Life is tuff.....its even tuffer when your stupid
    {John Wayne}

  3. #3
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    South Texas
    Age
    66
    Posts
    7,816
    Quote Originally Posted by Texas10 View Post
    What was the velocity of your 41.2 grain load?
    Man I have no idea. That was back a few years and I worked the load up without the benefit of a chrono. Come to think of it I was probably using a 10X SS too.
    The Dunning-Kruger effect is alive and well.

  4. #4
    Basic Member
    Join Date
    Jan 2015
    Location
    Austin
    Posts
    1,710
    Just got my box from Brownells with two boxes of FGGM 168 match ammo and a box of 168 SMKs to do some load matching.

    First things first was I measured the CBTO of the FGGM and found it varied between 2.226 and 2.230 on the several samples I checked and an OAL of 2.800 plus or minus a few thou. I did not check all 40.

    Next I set up a dummy cartridge using my FF brass drilled and tapped 6/32 and a 168 SMK from my new shipment loaded and found touch at 2.220 which means in my Shilen match barrel the FGGM is .006 to .010 IN the lands. No wonder is shoots so well!

    To confirm, I slid a live FGGM round up the chamber with the bolt out and gave it a firm push. With a cleaning rod down the muzzle, it took a firm push on the rod to dislodge the round confirming the factory load is in the lands in my barrel.

    Since I'm developing this load for 300 and under, I'm considering finding a lower and more accurate node. Maybe somewhere around 38 or 39 grains. Any comments on where to start or where that node might be?

    26 inch, 10 twist Shilen, 205M's, Varget, Hornaday match brass.

    Edit: I pulled down a new FGGM 168 Sierra Match today and to my surprise it had 40.0 grs of "special" powder. I expected to find 42.0 grs IMR 4064 but i guess they don't use that any more. Listed velocity is still 2650 fps.


    Banning a gun will not solve what is a mental health crisis inflamed by incendiary rhetoric on social and television media. The first amendment in this case is less precious and more likely the causal factor than the second amendment.

Similar Threads

  1. Federal gold medal match 308, came apart in chamber!
    By rfkhunter in forum 110-Series Rifles
    Replies: 25
    Last Post: 08-09-2017, 12:52 AM
  2. Federal gold medal match large rifle primers
    By Bolts in forum Ammunition & Reloading
    Replies: 20
    Last Post: 03-12-2016, 02:07 PM
  3. Federal Gold Medal Match LARGE RIFLE PRIMERS???
    By cowtownup in forum Ammunition & Reloading
    Replies: 3
    Last Post: 06-11-2015, 11:11 PM
  4. Federal Premium Gold Medal Match 7.62 X 51mm 175 grn SMK
    By Bill Star in forum Ammunition & Reloading
    Replies: 5
    Last Post: 11-19-2011, 02:37 AM
  5. Replies: 0
    Last Post: 11-16-2011, 11:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •