Anybody ever tryed this out..thinking about trying it out about $40 for 50 rd..ships in plastic reloading box from grafs and son...
Anybody ever tryed this out..thinking about trying it out about $40 for 50 rd..ships in plastic reloading box from grafs and son...
I bought 100 for my buddy's 358 win. Seemed good loading them. No reloadings in them yet.
I have no personal experience with them but was told it is pretty good brass.
Thanks ..they also have brass from kinectic which is usa mfg. under grafs brass listed as 308 match
I'm running there small rifle primer 308 brass now. It is awesome. I consistently get standard deviations in the single digits. Would not hesitate to buy again.
Sent from my SM-G960U using Tapatalk
I've got 100 pcs of their SRP 6.5 CM bass. It's nice brass,but it has even less volume capacity than Lapua brass.
I can't get the velocity out of the Peterson brass that I get from the Lapua or Nosler brass without showing high pressure.
With my 308 brass I have had no problem getting above published velocities based upon load data with my 26in Barrel vs. 24-inch Barrel velocity stats
Sent from my SM-G960U using Tapatalk
Using 42.2gr of varget I'm getting an average veloicty 2680 and a sd of 7. With the publish load data they're getting 2680 at 43.3 grains with a 24-inch Barrel versus my 26 inch barrel
Sent from my SM-G960U using Tapatalk
3 firings so far
Sent from my SM-G960U using Tapatalk
Corrected I just loaded up the 3rd firing
Sent from my SM-G960U using Tapatalk
Bookmarks