School me on Annealing Brass....

[yobuck]

BTW, if you don't want to spring for something such as Light annealer .....http://www.cartridgeanneal.com/

Bill recommended this setup to me about 2 years ago. I think its an excellant way to anneal.
I had tried other ways and they all seem to get it done. The liquid Tempilaq takes away
most chance of error in over heating. That could be used with any system you choose of coarse.
The Anneal Rite does allow for doing it very quickly however and theres no water involved.
50% alcahol dip will allow for removing the Tempilaq residue especially with a mild abrasive pad.

[Stockrex]

Bill recommended this setup to me about 2 years ago. I think its an excellant way to anneal.
I had tried other ways and they all seem to get it done. The liquid Tempilaq takes away
most chance of error in over heating. That could be used with any system you choose of coarse.
The Anneal Rite does allow for doing it very quickly however and theres no water involved.
50% alcahol dip will allow for removing the Tempilaq residue especially with a mild abrasive pad.

bill, yobuck, good stuff, thanks for sharing, this is a great solution for a tight budget.