Many questions about a model 11vt stock swap.

[jpdown]

Very same gun. Can anyone post part numbers for the bottom metal - and metal trigger guard? Thanx

I copied this information form another post. So use at your own risk.

FRAME ASSY SHORT MATTE (DBM) - PN: 106238 $68.00
TRIGGER GUARD MATTE (AT) - P/N: 105417 $24.00
MAG BOTTOM SHORT MATTE (DBM) - PN: 106245 $19.00

These are all metal with matte finish. So double check with the sales person when ordering through Savage Arms Parts.

[Chrazy-Chris]

Thanks for your help everyone- I just ordered the tacticool for my 11VT. I'll let ya'll know how it goes. I plan to bed the stock using acraglass or something similar (hopefully I can find something locally) and painting it myself. I'm going to hold off on ordering any new bottom metal components until I see what I need. I'll probably order a metal trigger guard eventually just for the sake of replacing the plastic one.

[Oscarflytyer]

Thanks for your help everyone- I just ordered the tacticool for my 11VT. I'll let ya'll know how it goes. I plan to bed the stock using acraglass or something similar (hopefully I can find something locally) and painting it myself. I'm going to hold off on ordering any new bottom metal components until I see what I need. I'll probably order a metal trigger guard eventually just for the sake of replacing the plastic one.

Really looking forward to how the stock works out for you! I would like to eventually do the same with mine.

[Oscarflytyer]

I copied this information form another post. So use at your own risk.

FRAME ASSY SHORT MATTE (DBM) - PN: 106238 $68.00
TRIGGER GUARD MATTE (AT) - P/N: 105417 $24.00
MAG BOTTOM SHORT MATTE (DBM) - PN: 106245 $19.00

These are all metal with matte finish. So double check with the sales person when ordering through Savage Arms Parts.

Thanx JP. Looking at this as my first upgrade. Scope will eventually be next.

[1375619cm3]

I copied this information form another post. So use at your own risk.

FRAME ASSY SHORT MATTE (DBM) - PN: 106238 $68.00
TRIGGER GUARD MATTE (AT) - P/N: 105417 $24.00
MAG BOTTOM SHORT MATTE (DBM) - PN: 106245 $19.00

These are all metal with matte finish. So double check with the sales person when ordering through Savage Arms Parts.

Would these part numbers work for the 11vt in 243?

[jpdown]

The parts should will work with any Savage Short Action Centerfeed Model (10, 12, 14, 16) and Savage factory or aftermarket stock inletted for a centerfeed DBM frame assembly (surround) and your current SA magazine box. When you call Savage Arms Parts with your rifle serial number to order, ask them to cross check.