110 Blind magazine modification for 3.90" COAL

[nocturnalnasty]

Okay, THANK YOU!!! That makes it much more easy to understand. I have a 7mm RM 110 staggered feed and want to be able to load the 168 and 180 grain VLD's as a repeater. So, that is the actual goal. Sounds like I would be better off leaving the loading ramp in tact and just removing the material at the rear of the magazine opening. Since I am going to "glue" the new center feed mag in anyway, couldn't I just move it back to match up with the bolt face/new enlarged magazine opening? I'm going to call Savage today and order the mag and follower. Thanks again for all of your help I really appreciate you sharing.
John

[nocturnalnasty]

Called Savage and should have a center feed mag box, follower and retainer on the way. I will try to remember to take pictures and document this process so that anyone else that might be interested can see how the conversion is done.
Stay tuned.....
John

[KRP]

Sounds like I would be better off leaving the loading ramp in tact and just removing the material at the rear of the magazine opening. Since I am going to "glue" the new center feed mag in anyway, couldn't I just move it back to match up with the bolt face/new enlarged magazine opening?
John

That's what I've done on the stagger feed actions.