Results 1 to 25 of 42

Thread: How To Fit More Powder Into A Case

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member
    Join Date
    Jul 2009
    Posts
    1,248
    Ok, 50 thou off the lands takes away some pressure. Do you have any problems with compressed loads pushing the bullet out in hot weather, or do you take them to the range in a cooler, etc.? Thanks Dean.....Jim

  2. #2
    Basic Member scope eye's Avatar
    Join Date
    May 2008
    Location
    Sebring FL
    Posts
    2,795
    Quote Originally Posted by FW Conch View Post
    Ok, 50 thou off the lands takes away some pressure. Do you have any problems with compressed loads pushing the bullet out in hot weather, or do you take them to the range in a cooler, etc.? Thanks Dean.....Jim
    I have never had that problem of the bullets pushing out in hot or cold weather, I don't know what the term is for powder, but I compress the load but I don't hydro lock it, and when I am seating the bullet I seat it in SLOWLY to allow the powder a chance to conform into place.

    Dean
    RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.

Similar Threads

  1. case H2O capacity vs powder capacity?
    By madison in forum Ammunition & Reloading
    Replies: 6
    Last Post: 10-30-2010, 08:12 AM
  2. case volume vs. powder volume
    By steveinwv in forum Ammunition & Reloading
    Replies: 2
    Last Post: 05-29-2010, 09:25 AM
  3. MOVED: case volume vs. powder volume
    By 82boy in forum 110-Series Rifles
    Replies: 0
    Last Post: 05-28-2010, 11:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •