I have just what you need in the classifieds. Are you a paid member?
I would like a magazine like this
I want it on this gun stevens 200 .22-250
Is this possible and if so, what do I need. I want the whole assembly to sit flush with the bottom of my stock. Magazine included.
I have just what you need in the classifieds. Are you a paid member?
http://www.sharpshootersupply.com/ click on Mag's & Ramps. I dont know about with that stock, you can try to get ahold of them and see what they tell you. Also http://www.cdiprecisiongunworks.com/ make bottom metal and inlets for it. Looks different, but is a DBM setup
Hope that helps alittle
I have done it with a Stocky's stock, factory bottom metal, and a dremel tool with a mill bit. Mine is a DBM.
http://savageshooters.com/SavageForu...c,45192.0.html
my only problem is the mags sticking out the bottom do they make one like the stock ones that stagger feed in the mag.so that it rides flush with the bottom of the stock?
The five round mags should be fairly flush. You should be able to find the parts pretty easy- alot like myself are selling the parts after switching to an AICS compatible bottom metal.
Has anyone done this with sharp shooters setup? any pics of the finished product? Am I seeing it correct, that you use the exsisting mag box just finish with a clip on bottom?
Yes, I used factory bottom metal and magazine. The metal I used for the Stevens 243 picture is from a Model 11 300 WSM that no longer needed it.
Bookmarks