Out of curiosity have any of you guys had problems with Lee dies? The set I bought for my 30-06 won't consistently seat bullets or size the necks. My last batch that I reloaded with these dies were horrible. I could easily pull the bullet out by hand after using the neck sizing die and the bullet seater die forces me to throw a fourth of what I make in the trash because the lands will scrape one side of the bullet when I chamber the rounds. Despite the errors the rifle still produces excellent groups although I think they could be better. .45 MOA is my record thus far and I am still learning the rifle since I just finished building it approximately 2 months ago. Round count is somewhere around 70-80. I have replaced them with RCBS dies now as I have found the quality of all my RCBS stuff to be top notch. I too am becoming very picky about the ammo I make because I am getting into long range comp with my 30-06.