Score-Hi makes the one you need. You can get them from MidwayUSA, Brownells, and SSS. They make a small(204,223, sized magboxes), medium(reg short action length), and large(long action length).
Both guns should take the same follower.
Does anyone market an adapter that fits into the staggered feed magazines so I can load one at a time? I need one for a Striker and one for a 12 to start with--both are .223 case size. Thanks, Steve
Score-Hi makes the one you need. You can get them from MidwayUSA, Brownells, and SSS. They make a small(204,223, sized magboxes), medium(reg short action length), and large(long action length).
Both guns should take the same follower.
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
Thanks Pdog--thats what I needed- Steve
If you have the newer centerfeed, SSS has developed a single-shot follower that IMO is better than the Hi-Score.
OK, Midway has delivered three of the score-hi followers. I chose to do the striker first--now I need a tutorial on disassembly of the magazine/trigger linkage. I guess that I could just take a hammer and punch to it, but I'm sure there's a right and wrong way to do it. Help, please. Steve
bottom slides off.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Thanks--I'll give it a try. Steve
Bookmarks