You'll have to re-adjust the head space as the bolt lengths will be different.
Jay
I am thinking about buying a Pacific Tool & Gauge Savage Bolt Body, are they drop in or is there work that needs to be done to get then in right?
Thanks
You'll have to re-adjust the head space as the bolt lengths will be different.
Jay
no you will not have to adjust the head space if it is just the body you are changing. we have been through this before guys. if the same bolt head is used is a drop in fit. some will argue that with me i know.
The lugs are on the bolt head, why would the body have any effect on the headspace?
when you change the bolt body out check your firing pin extrusion and just to be on the safe side check head space. Unless something is way out of whack head space should be fine but to pacify everyone check it anyway it will save a lot of headaches with the forum inlaws heheheit won't unless it is way out of spec and you force it to lock up on the bolt handleOriginally Posted by moorepower
"And you shall know the truth, and the truth shall make you free.” John 8:32 (New King James Version)
My understaning is that No it is not a drop in part, you need to have the back turned down so that the baffel will fit.Originally Posted by bbradford71
Bookmarks