Nope, but the wooden dowel is close. I read an article in one of the precision shooting pubs were the writer was talking about compression dies that are used on some factory loads. I hated using the bullet to compress the load because of the ring that the seating die puts into the bullet at the ogive. So I got the idea to build my own compression die out of an old 357mag decapping die. It is installed in station 3 of one of my Dillon 550s and the seating die is moved to station 4. Takes a little getting use to but works like a charm. I have now built 4 compression dies in different calibers. I am supprised that one of the die mfgs haven't made them yet.