To start, I would say the finish on them is better than anyone Else's I have ever seen. They blend the break in so well, it is super hard to tell where the break ends, It looks as if the barrel and break are one piece. Fred is a Scientist of sorts, he built a rig that can measure the amount of recoil a rifle produces, and he has experimented with several designs, until he found a break that was the most efficient, and reduced recoil the most. He placed many hours of research, and experimatition into his breaks. Fred still does test with other makers of breaks testing them on his fixture, so far only a few work as well as his does, and they are usually a similar design. I am sure if Fred found a break that worked better he would figgure out why, and how to adapt that to his breaks, so far his design has remained the same for a few years. I have been to a few long range benchrest matchs, and since IBS has aloud breaks on heavy guns many are now using breaks, and 9 times out of 10 everyone is using a break similar to what SSS makes, I think that say something about what works.
Bookmarks