Quote Originally Posted by dbranger94
I found a place to get some nice small thrust bearings with the races built into the washers. They are at a place called AVID and they sell bearings for RC cars and whatnot. I believe the one we need is the 5x12x4mm and they are only $3. Shipping is cheap too.
Link: http://www.avidrc.com/product/13/thr...-bearings.html
After purchasing just a few of the above mentioned bearings, I found that my hunch was correct and their outside diameter of 12mm is just a touch too big to use in the Stevens/Savage Bolts. Desired bearing outside diameter is between 11.5 and 11.7 mm (approx .454-.455 inches)

The good news is that their prices and shipping rates are extremely reasonable and they arrived at my home quickly.

Cheers,
Thomae