Quote Originally Posted by gotcha
sauced10, uh oh, you opened a BIG can of worms on this one! Go to Savage 110-based centerfire rifle page & chk 2nd thread down. "headspace" by: possum1. I'm assuming you're going to install a new bbl. My advise would be to use the hd space go-gauge....... then, w/ tape of a known thickness applied to the end of the gauge use as a no-go gauge. Your tape should be between .001" & .002". ( I may get a lot of flak here) Congratulations on your new equip. and welcome to the barrel nuts! Do yourself a favor & sprout $12.00 for a membership. You won't regret. Then you can access TONS of info on scope mounting, bedding, mods etc. plus the advertizing section. You got your toe in the water...... time to go for a dip ;D You may also find members living near you that would be willing to help out, that already have the tools for a bbl. swap. Good shootin', Dale
I'll get a membership :)

Its a new savage rifle with the stock barrel. I was talking about my brass resizing.