Quote Originally Posted by Skunce
I'm installing a Sharp Shooter Competition trigger for the first time and the instructions don't say anything about what to use to lock the adjusting screws in place. I was thinking I would use blue Loctite, but I'm curious to know what others are using. I want to be able to change the adjustments later if needed.
DO NOT USE ANY LOCTITE ON THE TRIGGER. (Unless you want to trash the hole works.) Loctite has a wicking affect and will creak and crawl everywere you don't want it to go. Some people use finger nail polish but, there is no need to use any product on the screws of the trigger.