I'll c if I can come up with something.............
Any pictures to go with the above?I have the Lee Handheld Autoprime as mentioned above and have been very happy with it, but I barely use it now. I have been using the press mounted that fits the Lee turret press and the Lee Breech Lock Press (and maybe others?).
[B][SIZE=3]Dennis[/SIZE][/B]
I'll c if I can come up with something.............
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
http://www.leeprecision.com/cgi/cata...rretpress.html
Try this out. Scroll Down to where it says "Lee Safety Prime".
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
The Lee Hand loader.
"Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." ~ George Washington
has anybody tried the Hornady hand primer? I picked one up a couple weeks ago, and just used it today on some reloads. The feel is good and smooth, and the primers seemed to seat very uniformly. However, I'm thinking the seating stem is a little too long, as the primers were a little deeper than with the Lee Auto Prime, or the RCBS. It's nothin' my buddy's small lathe can't remedy though. As soon as the wind stops blowing 40+ MPH, I'll see if the loads are affected any.
Doug... 8)
I have a RCBS and a Lee. Much prefer the Lee. I think it the only Lee tool I have left on an otherwise "Lee Free" reloading bench.
Charlie
laportecharlie
+1 - I have the Lee hand held and the one that mounts on the press (Ram Prime, I think) that I use to batch prime if I'm doing brass to load later. Once I figured out what those goofy shaped metal things with the springs were for, I use the Safety Prime almost exclusively with a turret press, you can go from a fired case to a loaded round without having to remove the case from the press. I've loaded 1000's of rounds with this setup and the mechanisms are still running just like they're supposed to. The only downside is that you need to remember to put in the primer (note powder on press) :)Originally Posted by Dennis
[img width=600 height=400]https://lh6.googleusercontent.com/_5kErdS37uEg/TVKyh9JAR-I/AAAAAAAAAYU/wkBFTZ1vzjQ/s720/IMG_4412.JPG[/img]
[img width=600 height=400]https://lh3.googleusercontent.com/_5kErdS37uEg/TVKykgMOoSI/AAAAAAAAAYg/oOdfWAk6XNw/s720/IMG_4415.JPG[/img]
Thanks NefariousD! I had forgot all about posting up some pics. Glad you got to it. The Safety prime is nice on the turret press since it goes in empty and comes out done. Sped up my reloading a ton.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
The new version of the Lee AutoPrime is a turd. They fixed the one thing that was wrong with the old one (weak lever) but totally eff-ed up the rest of the design in the name of "improvement." Really crappy part is that the new handle isn't compatible with the old model. I'll have to mod it to get it to work.
I used the RCBS hand primers for years. One set up for small, one for large. Got one of the new RCBS universals that you don't need to switch shellholders on. Really slick. Shorter squeeze. Only problem is that the nice square primer tray doesn't fit as tight as the old models.
Almost forgot. Also have an RCBS die that mounts to the press. Uses a shellholder and you load the brass up on top of the press. Has a spring-loaded plunger for either large or small and seats primers one at a time. That's what I started with 40 yrs ago. Used it the other day for old time's sake and man is it slow! Nice positive feel though.
The RCBS Universal rocks. It is comfortable to hold and makes quick work priming any case. Honestly, it's all I've ever used, and I doubt I'll switch to anything else as it works so well.
-Dan
If it's anything like the auto feed for the 12 Ga Loadall II, it it will be a disappointment...........I learned that the hard way.Originally Posted by Dennis
Vietnam Vet, Jun 66 - Dec 67
Bookmarks