Best bet is buying a used wooden stock and cutting it down yourself

Here is a Stevens 200 in 243 Winchester. The stock was a plain jane hardwood sporter stock that I cut 2" off the butt end and installed a grind to fit Pachmayr Decelerator youth pad. I also cut a few inches off the front and recontoured it, and had a factory sporter barrel cut and re-crowned to 18.5" The scope is a Minox ZA-3 in 3-9x40 in Burris Signature rings on Burris standard style bases

For comparison sake, the rifle next to it had the butt cut 1" from stock length before the pad was fit, and it has the factory 7mm-08 22" tube on it.

[img width=600 height=234]http://i38.photobucket.com/albums/e115/rm_5960/PC230039.jpg[/img]