I cheated and went to shawn carlock's website, from what I know he is the one that made the edge a mainstream cartridge. He is at http://www.defensiveedge.net/338%20e...-edge-load.htm. Anyway I run 92.6 grain of H1000 in a Rem case, I use CCI 250 because that is what I have and Sierra 300 SMK I get about 7 reloads out of my brass before the primer falls out, I do not anneal. I have not chronograph ed this load yet but I bang steel with it and it shoots decent enough groups for me that I am afraid to see the numbers for fear of a rework. I run it out of a 30 inch Shilen with a standard break on a Target action. I bounce between a Weaver T36 and a NXS 5-22 on the Edge depends on if I am load testing another gun or not.

Now standard I worked up from 90 grains and kept working it. Every gun is different please do not try this in your gun with out work up. Its common to see H1000 in 92-94 grains of powder but it also depends on barrel length.