Sharpie?
Engraving-electro pencil?
I want to label or engrave a couple Shilen SS barrels with caliber etc. I looked at engravographs and a couple Marking Methods Inc products but I just don't want to put $350+ into something to just write on a barrel. So, I'm looking for any suggestions I can get. All I can think of now is buying a label maker and printing out a sticky label. I'd rather have something that is a little more permanent though. Any ideas?
Thanks!
Sharpie?
Engraving-electro pencil?
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
Couple suggestions here,
1 find somebody nearby that has a laser engraver they could do a very nice etching job for ~$20 or so.
2 use a resist& acid etch it our self, or look into electrolytic etching.
Whenever the legislators endeavor to take away and destroy the property of the people, or to reduce them to slavery under arbitrary power, they put themselves into a state of war with the people, who are thereupon absolved from any further obedience
Thanks for the tips! The acid etching looks like it might be the ticket! I really appreciate the help.
Local gunsmith may have a set of stamps.
I've been marking my barrels with one of these etching tools.
http://www.etch-o-matic.biz/
http://www.harborfreight.com/36-piec...set-35121.html
Not as pretty as the laser engraving or etching, but it works.
I've labeled a couple of barrels with the Harbor Freight stamps and they work good. Take your time on the lining up of the different stamps. I have been using a rocking motion with the stamp as I mildly tap the stamp. Try a piece of scrap until you get the hang of it. I think you can find these on sale for less than $10
Bookmarks