Originally Posted by
jawjadawg
I would also like to know how much of the case to leave behind the rim.
Cut the case down as far as you can go. The case head has a thick spot behind it, you should cut down to that level. The amount behind the rim is unimportant.
Thank you
Originally Posted by
jawjadawg
Finally, is there any value in using a 357 magnum case on my magnum rifles instead of the 38spl I will use on the 473 and 378 bolts? :) j/k
Nope, none at all.
j/k is internet for "just joking"
"38 spl lift kit ball bearing size."
One that fits down in the hole. You just want a small amount of the bearing surface sitting above the case.
Bookmarks