Could it be a headspace issue? I notice if I tighten the barrel or barrel nut a lil to much my headspace is VERY tight and it causes my bolt handle to get VERY tight and I have to redo it
Hi folks, new here. Just got my first LH 110. Bolt lifts smoothly at first, then the final 20 deg is very stiff and rough. I have to drop the gun from my shoulder to cock it completely. Gun smith polished up the insides but still lifts very hard. Not right...
These guns been around a long time, must be something simple. Please advise. >
Thanks
RDL
Could it be a headspace issue? I notice if I tighten the barrel or barrel nut a lil to much my headspace is VERY tight and it causes my bolt handle to get VERY tight and I have to redo it
When I first got my rifle, I found the action rather stiff. I raked some dummies through it, it's pretty smooth now.
Agreed.Originally Posted by firemachine69
Most actions will smooth out considerably as it breaks in.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
I gave some guys a heart-attack when I said I was opening and closing the bolt with just the factory grease in it. But if I don't tell people who handle it for the first time right now, they think it came smooth from the factory as such.
They make or you can make a cheap life kit for your bolt. The other option is to send the action to SSS and they will do it for over $100 as I recall. They put that same inexpensive lift kit in it as part of the process. Savage is not a high quality or for that matter at high priced fired arm. If you want really nice you have to spend some money.
Johnds
Thanks for the help. I emailed about lift kit and will do a headspace check asap. Continuing to work action to smooth it out. Seems to be a problem with alot of them from what I found on the net.
RDL
Joe Degrande from Savage will send you a prepaid shipping label for you to send your rifle back for adjustment. Savage fixed my bolt timing and it didn't cost me anything but a trip to the post office to send it.
Before you go and spend money on a fix, pull the front action screw and see if it
is being scraped by the bolt lugs. I had the same problem with a 112FV, and it turned out to be the bolt was a thread too long. A little Dremel action solved the problem.
Also have a friend with a Model 25 that had the exact same problem. Seems getting a little over zealous on the tightening was the cause in both cases.
I've had my Savage 10fp for at LEAST 5 years and the bolt is still really stiff to lift.
I've been looking all over for a fix and just ran across this thread!
Can someone link me to that lift kit?
~Mikey
Originally Posted by demented
Nice. Up here in Canada, the rifle goes back to the a wholesaler in Southern Ontario, in which it will cost you shipping (both ways), and perhaps a nice bill if they deem their work was due to "abuse".
I make my own. 5/16" ball bearing in a 38 or 357 case with the walls cut off. Trim off a bit from the BAS. Drop it into the cocking sleeve. Tighten the BAS. All done.Originally Posted by skorcher247
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
Installing a bolt lift kit will not be the coup de gras for a severe hard bolt lift. The lift kit only adds a small degree of smoothness. A time and true by Fred will alleviate the issues.
[img width=600 height=450]http://img.photobucket.com/albums/v675/gcidso123/savage/savagebolt001.jpg[/img]
[img width=600 height=450]http://img.photobucket.com/albums/v675/gcidso123/savage/savagebolt007.jpg[/img]
[img width=600 height=450]http://img.photobucket.com/albums/v675/gcidso123/savage/savagebolt008.jpg[/img]
this bolt screw is to long and needs to be trimmed shorter to compensate for the change. the newer screws are shorter and should also be trimmed or you put extra pressure on the spring and change the position of the moving parts.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
what is that??Originally Posted by Blue Avenger
(edit)fixed the link, I had been moving things around as I was getting to many pictures, so some sort of filing system was needed :) blue
That is a ball bearing glued into a 357 case. Otherwise known as a bolt lift kit. :)
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
Here's a question for you guys, what would the affects be of simply trimming the BAS? I figure this would lighten tension on the Firing Pin spring and reduce bolt lift. I've noticed what seems like different amounts between my different Savage rifles.
Any thoughts? Ill affects on the firing pin power?
Romans 10:9 "That if you confess with your mouth, Jesus is Lord, and believe in your heart that God raised him from the dead, you will be saved."
[img width=600 height=450]http://img.photobucket.com/albums/v675/gcidso123/savage/savagebolt008.jpg[/img]
This bolt screw is not shortened to make up for the loss of space the "lift kit adds"
This is one of the "older" screws that fits down inside the sleeve. If you were to use this screw at its present length with a lift kit you would really mess up spring pressure and firing pin travel.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
less spring pressure slows the travel speed of the firing pin and reduces the power of the strike against the primer.Originally Posted by cowboyarcher
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
That's what I was thinking, is there a way to determine the correct amount of spring pressure?Originally Posted by Blue Avenger
Romans 10:9 "That if you confess with your mouth, Jesus is Lord, and believe in your heart that God raised him from the dead, you will be saved."
I had the same problem and sent the barrel and action to Fred at Sharp Shooters Supply. Now I can cycle the bolt after firing with one finger. That's right one finger. I couldn't believe it. This savage is a keeper now. http://www.sharpshootersupply.com
Bookmarks