I make my own. 5/16" ball bearing in a 38 or 357 case with the walls cut off. Trim off a bit from the BAS. Drop it into the cocking sleeve. Tighten the BAS. All done.Originally Posted by skorcher247
I make my own. 5/16" ball bearing in a 38 or 357 case with the walls cut off. Trim off a bit from the BAS. Drop it into the cocking sleeve. Tighten the BAS. All done.Originally Posted by skorcher247
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
Bookmarks