You will get all kinds of different views on this. I’m guessing you have a wood stock? Well, if it were me, I’d do Front 35in.lbs., Rear 30in.lbs. If you are one who like to play with Action screw torque, set the front at 30-35in.lbs. and start the rear at 10in.lbs. Then shoot it and keep tightening the rear until you find the best torque/accuracy ratio. I don’t play with screw torque plus, I use an Aluminum Chassis. So my front/rear are 65/60.
EDIT: didn’t notice it was Accustock at first. Correct answer in Response #4
Bookmarks