416 Taylor
416 Taylor
[FONT=Comic Sans MS][SIZE=3]U.S. Army Retired Disabled Veteran[/SIZE][/FONT]
Geez Thanks Mike a 14 year old girl can keep a secret better.LOL
Here is my latest one a 416 Taylor it's not a wildcat it's also not a Common cartridge, the best part is it's a pretty low investment caliber. First off the dies cost $35.00 and the brass is necked up 300 or 338 Winmag which are abundant. So no hi cost or rare brass involved you can also neck down 458 WinMag brass there is also 416 Taylor brass and Basic mag brass. Bullets are available from 300 to 500gr the barrel is a 30" 14 twist. I made that case in one pass from a 300 WinMag
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
Wow, it's a tough one! Were did you get those red bullets ??
[FONT=Comic Sans MS][SIZE=3]U.S. Army Retired Disabled Veteran[/SIZE][/FONT]
It's one for good luck.
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
[FONT=Comic Sans MS][SIZE=3]U.S. Army Retired Disabled Veteran[/SIZE][/FONT]
Looks like a REAL thumper!
Vietnam Vet, Jun 66 - Dec 67
H4895 is your friend, you can Taylor your loads "pardon the pun" from 50gr through 90gr and send that 400gr cinder block anywhere from 1500 to 2500fps depending they application.
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
Hmmm, how do you think that would feed from a RUM blind mag?
Rick_W
CPO-USN(Ret)
You don't know what you don't know.
I think it would if you cycled it slowly at let it position itself, I don't think it would cycle like a 308 with a quick follow up shot, but I am sure it would.
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
Gotta love harbor freight red. It's all my father uses, I'm more of high gloss black for my casts. I've also played with candy colors, they look good on big chunks of lead.
Interesting round for sure!
Whats with the teeth marks in the paint?
Some people want to make a difference in the world. I'm just here to howl at the moon.
Marks from me pulling the bullet in and out, when I was screwing with bullet seating depth.
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
still shooting this?
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Bookmarks