So far so wonderful--At first I had the trigger way too light--it would not reset after firing every now and then--got it back up to about 12 oz that seems to be the happy spot--I LOVE the Red Blade trigger
My bolt face was machined a little rough so I took it apart--used valve lapping compound and an empty case in my drill--smoothed it up like glass--now cases pop out with no marring on the rear
It is a lot nose heavy with that chunky barrel would like to add weight inside the stock on rear but the pads on the HS Precision stocks are glued on--would make a mess to remove it--BTW they wanted around $200 to add 1/2 inch to the stock plus shipping--I laughed at the guy
Working on a load for our 100 yd factory rifle class--hunting for projectiles at the moment
I love it! Will keep you posted
You need to plan a prairie dog trip with yours! Most fun you can have with a rifle!!!