So I picked up my Ultralite 7mm PRC, inspected it, bore-scoped the barrel (looked nice), and performed the thorough cleaning and then took the buggy down to the field for the recommended barrel break-in procedure. I chrony'd the 175gr. Hornady Precision Hunter rounds throughout the process, which only ranged from 2740's to a high of 2795 fps. The box specified 3000fps - probably out of a 24 or 26" barrel, but mine weren't even in the ballpark out of the Ultralite's 22". Accuracy after 11 rounds was 1/2 MOA. To ensure that my CE M2 was still working accurately, I used the Burris ballistics tool (for my Veracity 4-20x scope) to generate a dope card using 2800fps, and dialed it in for the 600 yard plate. I fired 3-shot groups which were 1.5 MOA low. At 710, I jacked it up by 1.5 MOA . At 850, it was still 0.25 MOA low. I went through two boxes. Either the barrel needs 100 rounds to fall in, or the Hornady velocities are pie.