Quote Originally Posted by Rocketvapor View Post
Dave, thanks for the link.
I've been looking for wear indications on the wife's receiver and see where the baffle ball is dragging rotating out of the slot on the bolt.
Is this something that will get worse with time and be a concern or just something that will wear in and get smoother?
What do you mean will it get worse? I mean, no. The screw is usually too tight because people see them & think they should be super tight. But it shouldn’t. The newer rear baffles don’t have the set screws. The bearing balls are held in by each other. On yours, just use lock tight on the set screw. Only tighten the set screw so the spring has no play. Again, the article explains it well.