You should be able to take an adjustable wrench to engage & rotate the cocking piece into battery.
Bought a Savage Axis 22/250 today. Went to install the bolt, but the firing pin/spring was in the wrong position (up). Of course, it is now blocking the bolt from going in completly. How do I get it back into poisition?
Here's a picture of what I am referring to. http://www.rangernetworking.com/gun.htmhttp://www.rangernetworking.com/gun.htm
Thanks.
You should be able to take an adjustable wrench to engage & rotate the cocking piece into battery.
Whenever the legislators endeavor to take away and destroy the property of the people, or to reduce them to slavery under arbitrary power, they put themselves into a state of war with the people, who are thereupon absolved from any further obedience
set the cocking piece against your wife's favorite table push down to re cock
The Edge/Axis doesn't have a heavy spring like a Savage, you should be able to cock it with your thumb.
+1 You will need to manually reset it.
Bookmarks