Call SSS that is where I got mine
Hello everyone. This is my first new topic to post. I really like this forum. I have learned alot from looking at it every day. I am trying to do my first savage build. I have a mcgowan barrel and action from Jim and b/c medalist stock from stockys. The problem is i have no screws to attach stock to action. I called Jim and basically said call b/c. I called b/c they do not have any. I called midway and they do not have any. I can't get stockys on the phone. I do have some duck tape. Anybody know what to do. Thanks
Call SSS that is where I got mine
...Just use 1/4-28 allen bolts..Cut to fit...
I get mine from an auto parts store here. Have to cut them down to fit cause there too long but no big deal w/ a dremel.
NAPA and DREMEL solved this problem.
Thanks;
joe b.
This is what I had to do on one of my stocks, cuts have to be perfect or bolt will hit the allen bolts!...Just use 1/4-28 allen bolts..Cut to fit...
[B][SIZE=3]Dennis[/SIZE][/B]
..Easy way to do it is take the bolt out. Run the allen bolt in..Cut the bolt lenght 1 thread below flush in reciever...
Just mark the bolt with a silver Sharpie or something that will be there when you take it out! Very easy...Easy way to do it is take the bolt out. Run the allen bolt in..Cut the bolt lenght 1 thread below flush in reciever...
[B][SIZE=3]Dennis[/SIZE][/B]
How about calling Savage?
Different stock takes different length bolts! Savage only supplies their OEM bolts.
[B][SIZE=3]Dennis[/SIZE][/B]
and OEM should work. At least that's been the case for me!Originally Posted by Dennis
I agree, they should, but not all stock manufactures conform to Savage spec's! That was the case with one of my guns!
[B][SIZE=3]Dennis[/SIZE][/B]
Thanks everyone! I ordered some from SSS and they fit perfectly
True! I've always had luck...with guns anyway! :DOriginally Posted by Dennis
Bookmarks