Welcome to the site!Originally Posted by BoilerUP
Yes, it is something a person with a small amount of mechanical ability can do. The problem is if you only plan on changing one barrel it doesn't makes since to buy the tooling needed to change the barrels. Now if you plan on switching back and forth, or changing to other calibers then it would be a good investment.Originally Posted by BoilerUP
Yes.Originally Posted by BoilerUP
Yes, the stock, and magazine will work. There is many different way to skin the cat. To do the change you will need a minimum of a bench vice, a set of hard wood barrel blocks, and a barrel wrench. Many pepole have problems with breaking looses factory barrels and have opt for a action vice, I have never used one. With a bit of patients a factory barrel can be broken loose with a barrel vice, or a set of wood blocks in a bench vice. For a beginner a go and no-go gauge set would be a good idea. many people set their barrels up with using fired and sized brass.Originally Posted by BoilerUP
All that would be needed is a bolt head change, but if you want the magazine to work you need to change the intire magazine box out.Originally Posted by BoilerUP
Bookmarks