Yeah I used some titebond 2 wood glue to kinda keep what crack and chunks I could from getting worse, worked it in. I think I'm gonna get the pillars cut (just picked up some lamp tube) and epoxy them in place, and the front area where it made an open channel, I'm gonna seal that off and fill with bedding material so it will be back to the original shape and also adhear to the back side of the pillar locking it in for sure.

As far as the hole in the bottom of the lug area I'll have to block with modeling clay and at least bed the lug area. Wasn't gonna bed the action but might as well do at least a small job around the lug area at the minimum