Your rifle should have a new style firing. Unless it’s <2019. But yes, it will fit using all the parts. Regardless, neither the firing pin assembly or the bolt sleeve are the cause of your issues. However, there is no harm in replacing the Bolt Sleeve for aesthetics. Though you’ll need to headspace. The reason your 6.5CM is having problems where you 30-06 is not, is because instead of the 30-06’s long, tapered case, the CM case has nil body taper.
You need to replace the Extractor bearing ball with a larger .140” ball. (I also use the modified Extractor). Also, file a little more bevel in your Ejector face clocked pointing to the Cartridge. Like the photo below.
Bookmarks