Quote Originally Posted by Andrew863 View Post
I was setting firing pin protrusion last night and noticed the pin was dragging a lot in the bolt head. Took it apart to the bare firing pin, I then noticed it was bent. I put it in the lathe today, and its .042 bent. I got it down to .0025, so I think this is going to help my light strike issue I have had a few times and it has to help ignition by not dragging on the bolt head. I have to tell you for a (factory blueprinted) action they did a pretty piss pore job if they did anything at all.
That is what makes them fun....you get to fix them.