I have the newest style, I just picked this gun up a couple days ago. Mainly wanting to lighten bolt lift if possible. The firing pin when fully cooked is right around .205 to maybe .215. But when I open or lift the bolt the firing pin goes back to around .265. Then when I close the bolt it drops to where it is caught by the sear, and is at the .205 when the bolt is closed and the gun is ready to fire. So when I lift the bolt I am moving the firing pin a extra .050 and that is also the point to where the bolt handle is at the most stiff point. Just want to see if there is anyway to get rid of the over travel of the firing pin.