First things first. Welcome to the site! Tons of good info here and lots of people who are more than willing to give advice and assistance.
Take the barreled action out of the stock and try the safety again with the bolt in the action.
If it works fine then chances are the trigger is rubbing the stock somewhere and will need wood relieved from the stock in that area. You would most likely be able to see the rub marks. Especially since it has been Re-stocked. Most are not just an east drop in like they want you to believe.
If it still doesn’t function correctly out of the stock then most likely the trigger is out of adjustment. Directions for that will depend on what trigger you have. If so it would be helpful to post a picture of the trigger.
Bookmarks