Bedding any stock or Chassis is never a bad idea, but the gains won’t be as seen on some over others. The Accufit stock already uses a full length Aluminum block. Which is the ideal bedding material. However, it is a mass produced ordeal by Savage. So having the consistency of an aftermarket setup is not something I would bet on. I would shoot it first. Likely gains in accuracy would only be seen, if the rifle was simply not accurate to begin with, with any loads, factory or loaded. That said, if an Accufit Savage is giving the owner already SUB 1” groups or better…, bedding the stock will not miraculously turn it into a 1/4MOA rig.

Once again, in case it was missed: Bedding any stock or chassis is never a bad thing as long as it’s done correctly.