I have seen where adjustments cause the trigger to rub the sear as it is being released. Also very hard to adjust down to 3# and not have it act like yours if your still using the factory spring.
So I take my 7mm stw model 114 to the farm to start sighting this thing in, I’ve sent this gun to savage for some chamber work, had the stock glass bedded, triggered to 3lbs.
I noticed before I left the house the safety wouldn’t move a couple different times even after re-engaging the bolt back and fourth a few times, then noticed it seemed to be working right, so…….I’m thinking I just didn’t bolt the rifle or half bolted it.
I start shooting, it’s operating fine then after chambering the 3rd round I can’t get the safety to move into the ON position, now I’m scratching my head, this is what this gun was doing before I started shooting it today….so I fire the 3rd shot, open the bolt, eject the brass, close the bolt and the safety worked fine……
I drop in the 4th round , close the bolt and the gun FIRES on its own…….totally caught me off guard , now I know I’ve got a problem but was starting to suspect one anyway.
Take the gun home take the stock off of it ..inspect it..and no matter what I do this thing runs fine OUT of the stock, bolt the stock back on and I start having the same problem, so I take the stock back off, I dremel tool anything in this stock that relatively looks like it may cause a problem but I can’t seem to fix the problem with the stock on …..
Its going to a gunsmith today to try to resolve this problem..??
Whats your take on the problem?? this is a older 114 “pre” accutrigger
Has anyone ever seen this issue before??
I have seen where adjustments cause the trigger to rub the sear as it is being released. Also very hard to adjust down to 3# and not have it act like yours if your still using the factory spring.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
With the limited information, it’s really just a shot I the dark. It does seem that it was adjusted too low. The problem when adjusted low is the spring doesn’t have enough pretension which can cause the slam fire. (Tripping when racking the bolt).
If you want, I can send you one of the lighter bar springs I make. I give these out free. It’s lighter through the entire range, but keeps good pretension to prevent slam fire. Just PM me your details and I’ll mail one to you in an envelope.
Spring I make on top, over a Savage factory spring (bottom).
So with the rifle out of the stock the safety works as it should?
I actually think the safety will not move into the off position because the the trigger mechanism didn’t reset after operating the bolt or it’s allowing the trigger to fire while closing the bolt .
It may be bad timing when the stock is bolted on vs off .
This may help as well. Gives a good adjustment procure.
https://www.savageshooters.com/conte...ent-Procedures
Dropped it off at a gunsmith I trust, told him I wanted the trigger at 3LB’s if he had to drop a whole new one in it, above all make it safe….
One of Daves springs will cure 80%
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Well…….was trying to figure out how to pm Dave then seen I need 15 posts, this is post 15, Dave I’ll be getting in touch…..
Sounds like classic trigger ortrigger shoeinterference, clock the action with safety off before slowly lowering itin. When the interference
Starts it will release the sear.
My gunsmith has fixed the problem, I had the trigger pull at 2.5 lbs, way too light for the factory spring, I’m waiting on Dave’s spring to get here, we’ll replace it and see what we can get down to safely, I’m good at 3 to 3.5lb trigger pull but I’d love to get to 2.5lb.
Haven’t forgot you friend. Just haven’t been to the post office. But it’s a com’n partner.
Dang! Sounds like your Smith did exactly what I said it was, huh? Hot darn! Well, even a broken clock is right twice a day.
Bookmarks