Ok , I have a Accustock in the closet so I looked . The little washer goes under the screw that is in front of the magazine release . The spacer I'm not sure about , but I didn't take the trigger guard off mine . Could it go under the bolt release ?
I just got a Savage 110 ultralight 308. I took the stock off and adjusted my trigger. I then proceeded to knock the trigger guard and magazine holder into the floor. Two spacers and a small washer flew out. I cannot for the life of me figure out where they go. They are not on the diagram and savage won't send me an image of how they go. Not too happy with my first savages customer service Can anyone help me? I would love to shoot my new gun but can't now.
Ok , I have a Accustock in the closet so I looked . The little washer goes under the screw that is in front of the magazine release . The spacer I'm not sure about , but I didn't take the trigger guard off mine . Could it go under the bolt release ?
No matter where you go , there you are !
What shape is the spacer? Can you post a pic?
Here are the two spacers. Thank you for the location of the washer. I am pretty sure the smaller spacer goes on the screw in front of the mag release, same as the washer just the top side of the mag well.
Now the other spacer...I am clueless and I have tried many locations.
Sent from my BE2026 using Tapatalk
Does it by chance go between the trigger guard & stock...like a locating dowel in the screw hole? It definitely looks like the screws go through them.
I have tried there but it does not fit. Savage finally said it goes between the mag well and trigger guard. I have put it both ways and it still jams up. I got something wrong. Man this is frustrating. 30 years of hunting never had such an issue with a weapon.
Sent from my BE2026 using Tapatalk
I’m sorry. That is what I meant. Between the bottom metal and stock....on the Action screw. It certainly looks like a screw goes through it.
The spacer goes in the stock , then the mag , then the trigger guard .
No matter where you go , there you are !
Thank you so much!
Sent from my BE2026 using Tapatalk
Isn’t that what I had said, LOL! J/K.. glad you got it figured out.
Yes I got it all back together. Thanks to everyone.
Sent from my BE2026 using Tapatalk
Ready to go!
Sent from my BE2026 using Tapatalk
Those "spacers" are something fairly new (last 2 years or so). I went through this same "where's this go?" game when I got my first review rifle in with one. Didn't seem like it fit right anywhere no matter where I tried it as it would leave the bottom metal standing proud of the stock.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Yeah, good looking rig. Really nice barrel!
Bookmarks