Each and every one Charlie. I don't have any pics doing a Savage, but a Rem.Originally Posted by Harriershot
First, get a pair of 3" 1/4-28 bolts and cut the heads off for guide screws.
[img width=600 height=450]http://i47.tinypic.com/14l24p1.jpg[/img]
I bed the guard after the action, but after the bedding cures and before taking it apart with the screws in place. Just turn the rifle upside down and use the rear screw to align the guard.
If you've previously bedded the action you can still use them to make sure the guard is aligned. They eliminate any "Gotcha's" with guard, screw and action alignment when you put the mess together.
Bill
Bookmarks