jamming just before fully chambering. Here is the fix for 110/10 and axis family

[nathantc]

I ordered a couple extra ejectors, springs, and retaining pins from midway last night to have spares in case I mess one up.

i ended up making a punch from the stem of a 1/32 drill bit. A 1/16 punch is to big, and smaller than a 1/16 punch is near impossible to find. Just letting you know in advance. Also when taking them apart i used a ziplock baggie. And worked on it with the bolt and my hands in the bag. Small parts under spring pressure can get lost very easily.