Quote Originally Posted by yoda4x4 View Post
Can someone help me with what exactly needs to be modified, and where to modify it? My 110 Tactical has an issue on occasion loading rounds (picture attached); it jams about 1/4" before the round is fully seated. And just so you know, this is a left handed model which is why everything looks backwards.

David

Sent from my moto g(7) power using Tapatalk
remove the bolt. remove the ejector plunger from bolt. file it to have a 45* angle facing exactly towards the firing pin. If you want to test this with no mods. Remove the ejector and cycle rounds until your are convinced. They will not eject without it, so you will have to pick them out. But they will never make that exact jam... Also if you get it to jam like it is right now, and can hold it tightly so the jam stays, remove the magazine and look in from the bottom you will see the case of the brass sitting directly on top of the ejector stopping it from falling down into place and chambering.