I recognize that barrel. . .
Looks good Tom!
Just out of the out of the stock. Using Marine Tex, some clay, and a little bit of tape, this is a pic of last nights bedding.
Will need to spend some quality time with the dremel to trim everything out, all in all, a fair job. Will post after the clean up is completed.
[img width=600 height=450]http://img.photobucket.com/albums/v245/dcloco/RifleBedding.jpg[/img]
I recognize that barrel. . .
Looks good Tom!
Romans 10:9 "That if you confess with your mouth, Jesus is Lord, and believe in your heart that God raised him from the dead, you will be saved."
Looks good. What did you use for a release agent?
Mother's California Gold car wax. Applied by fingertip and a Q-Tip in the angles that the fingertip won't make it to.
Very little wax is used. Touch the wax, rub on metal parts, and call it a day.
The white lines in the barrel nut area is clay. I fill in the indentations with clay so the bedding compound does not try to lock on to this area.
Same with the magbox to receiver area.....clay is your new friend.
Bookmarks