Quote Originally Posted by Txhillbilly View Post
Yes, For some stupid reason, some retard at Savage decided to call all New Savage short action rifles 110's. Years ago, all Savage centerfire bolt action rifles were built on a 110 Long actions, the short action cartridges just had a spacer installed into the magazine box along with an extended baffle on the bolt to reduce the bolt travel.

Only the WSM short action cartridges, and Model 12 Target actions come with Large shank barrels. Everything else is Small shank.
You're not quite 100% correct there TX.

From the get go (1958) through 1988 or 89 the Savage 110 was manufactured in both long and short action versions ( Gen 1 short action with 4.522" screw spacing). From 1989 thru the end of 1997 production everything was built on long actions. In 1998 the Gen 2 short-action (4.275" screw spacing) was introduced and remained in production through late 2007 - early 2008.

In 2005 the current Gen 3 center feed short-action (4.40" screw spacing) was introduced and slowly phased in over the course of the next three years with rifles being chamberedd in .204 Ruger and .223 Rem. being the last to be updated in late 2007/early 2008.

So the only years that all 110's were long actions were 1989-1997.

The large shank came into existence in 2000 or 2001 when Savage started offering the WSM and RSAUM cartridges as factory chamberings, and until the launch of the Target series models in 2008 the only rifles that came with a large shank barrel were chambered in those cartridges (and the 10ML muzzleloaders).