Stock Help - Savage 110 Tactical Hunter

[emc019]

This might help
https://www.eabco.net/Choate-Tactica...s_p_14690.html

That helps a ton, thank you! Looks like the Choat will most likely fit.

You didn't mention your intended use for the rifle.

The key characteristics for finding a stock for this rifle are 4.40 inch action spacing, center feed, bottom bolt release, and detachable magazine.

Your rifle has a medium contour barrel which may be too large for the barrel channel on a sporter stock. You can always open up the channel if necessary. Here a few ideas to consider.

http://www.bellandcarlson.com/index....tegory_ID=1088

http://www.bellandcarlson.com/index....tegory_ID=1140

http://www.bellandcarlson.com/index....tegory_ID=1127

Stay away from HS Precision because their Savage stocks are set up for top bolt release models only.

I didn't see anything in the description about it being an Accustock model. If it is, you will want to check with Bell and Carlson to see if it will still fit. The Accustock has a different recoil lug that may or may not fit an aftermarket stock.

Good point, the use of this rifle will be 95% range gun (mostly bench rest) and a slight chance I might want to hunt some day. If the replacement stock is too heavy I could always throw the factory stock back on for that purpose. This information was very helpful though, thank you!