One step forward, 2 steps back.
I fixed the ejection issue. The bolt face was clocked 180 degrees! Replaced the detent ball with a oversized one and it works perfectly.
However....
The rifle is intermittently fireing on its own with the bolt rotating to close. Not every time, in and out of the stock. It has a Timney trigger. After adjusting the sear 6 ways to Sunday, without success I put the accutrigger back in
Set it at 2.5 lbs and I can't get it to fire on its own anymore. The sear on the Timney has to me a worn spot. Hard to tell if it's factory but I doubt it.
So tomorrow I'll bring it to the range and rack the bolt over and over and over...