do not by cheap stuff now...just wasted money in the long term.
the press i suggested or buy a used STEEL/IRON press.
lee low end alum/pot metal stuff sucks in the real world.
skip the plate spend it on the press.
skip the case gauge( use your rifle chamber) use the money on the press
buy a lee hand case trimmer for now...spend the money on the press
( yes the wilson is correct but for low volume single tifle the lee will do fine)
that is almost 200 available for the press.
one sale at 140 right now
buy 2 reloading manuals and read then re-read...
understand the process and why.
no beer no tv no wife..peace and quite
Quote Originally Posted by RBT321 View Post
I .

Will this gear list get me going? Am I missing anything obvious?

$75 Lee Deluxe APP press
$30 Lee Bench Plate
$20 Powder Measuring Scale (no-name, Amazon)
$80 LE Wilson Case Trimmer/Mouth Chamfer Tool
$10 Case Lube
$-- Digital Caliper (already got)
$28 LE Wilson Case Gauge
$41 Hornady 546289 Die Set 2 6.5
$28 Hornady 044090 Microjust Seating Stem
+ Bullets, Casings, Primers and H-4350 powder.


And Bill: I'll go hunt up a decent book tomorrow. Thanks for the suggestion! Any recommended titles I should look for?

Ross.